50 litre permanently mounted boat petrol tank with vented cap and mechanical gauge

Part # LA2520


Standard fittings included with this tank:

2 1/4" thread

The tank is molded with a thread. This is used to attach a cap to the tank.

Nylon threaded vented cap with mechanical gauge and screw on breather.

The vented cap with gauge is manufactured the suit the 2 1/4" thread. The vented cap with mechanical gauge is fitted with a breather that screws in and out as desired for optimal air flow. The gauge has a float on a metal rod to advise how much fuel is in the tank.

1 1/4" brass inserts x 1

This brass inserts is molded into the tank. This is commonly used for theWema screw in elecronic sender.

3/8" brass inserts x 2

These brass inserts are molded into the tank. One is commonly used for the fuel pick up, one is for the breather if needed.

Nylon fuel pick up with stainless filter.

The fuel pick up is manufactured with a 3/8" BSP to be screwed into the brass inserts molded into the tank. The pick up also has a 1/4" BSP thread, so as a brass tail or a tank fitting can be screwed into it.